Bookmark this page | Homepage | Casual look | Mobile version | 如有业务需要请点击QQ咨询如有业务需要请点击QQ咨询Skype ConsultingSkype Consulting

Shanghai Sepna Chemical Technology Co.,Ltd.@


  • No Category

  • Contact:Mr.Qin Gao
  • Phone:86-021-66310806

riends links
  • No link
Your current location:Home » Product supply » Two Part Polyurethane Resin
Two Part Polyurethane Resin
Click image to view full size image
Product: Views:3Two Part Polyurethane Resin 
Unit price: Negotiable
Delivery date: Since the payment date Days delivery
Valid until: Long-term effective
Last updated: 2016-12-05 14:41

If you are planning to wholesale best cheap and high quality two part polyurethane resin China, or hot sale two part polyurethane resin in China from professional two part polyurethane resin manufacturers and suppliers and factory, please feel free to contact SEPNA, and welcome to check products price with us.Low Viscosity Polyurethane Potting Compound SP2602◆Detailed Product DescriptionSP2602 is two component no solvent RTV/Heating curing resin elastomer compound, mainly for using two component sealing, and potting field.Features1.Low viscosity, easily process2.Excellent performance on low-temperature and aging3.Excellent and stably electrical dielectric4.Very low Water absorption?5.Good adhere to most metals and plasticsUsageIt’s specifically formulated for sealing & potting of water permeable, communications equipment, junction boxes, transformers, electronic instrument tray components, electronic ignition controllers electronic sensors etc◆Data TableModel NumberResinCatalystSP2602ASP2602BAppearanceBlack FluidBrown FluidViscosity, cps(25℃)800 ± 200100± 50Gravity, g/cm30.96±0.051.17±0.05Mixing ratio, by weightA : B = 2.8 :1Working time, mins50Curing time, hrs5Hardness, shore AA:B=2.8:167A:B=4:142Water absorption, after 30 days immersion< 0.15 %Dielectric strength, kV/mm, 25℃>18Volume resistivity, DC500V,Ω·CM1×1012Dielectric loss factor, 50HZ0.02Working Temperature, ℃-60~100MAX Temperature, Short ?time,(UP to 0.5hr ℃115Note:①All data above were tested under standardized condition. The data is with 200g sealant testing feedback②All data listed in the chart were for the generalized item in the series; please refer to the related data sheet for special items.③Storage condition has a direct impact to the products’ shelf life, Please refer to the instruction for special items’ storing.Cup foam testTesting condition , stirring speed: 1500rpm, Beater diameter: 50mm,Cups volume: 250mlRatio of weight (A/B)2.8 / 1GMaterial temperature23°CStirring time25SNo-flowing time45MinNote:The weight of sealant is 200g.The Operation time of SP2601: 25mins, No-flowing time 45mins, When 70mins, the hard ness is shore A 10.The Operation time of SP2601K: 20mins, No-flowing time 35mins, When 50mins, the hardness is shore A 10.The Operation time of SP2601KK: 10mins, No-flowing time 20mins, When 30mins, the hardness is shore A 10.The curing speed under different conditionsThe curing speed of SP2601(the sealant is 500g, A:B = 2.8 : 1 )◆OperationEquipment operation processMaterial preparation: Stirring in the original drum, then pouring into dispenser.To avoid bubbles inside of finished products, both tank should be usually kept 3 to 5 minutes under the vacuum pressure 0-2mmHg.Max tolerance: Mixing proportion of deviation may affect mechanical properties, tolerance should be less than 0.5%.Other: Through the production, should always maintain the tank airtight . the compressed gas should be dry if need, otherwise part B will become sticky, and influence the mechanical properties.Suggestion of molding conditionMachine ?Maxing method ? ? ? ? ? ? ? ?Material temperature?Part A ? ?25-30 ℃Part B ? ?25-30 ℃low pressure Pouring machine (Gear pumps orvolumetric metering pumps or plunger )?Recommend to use a static or dynamic mixer???Equipment anti-curing time setting :?The operation time of glue: 25-35mins, its equipment anti-curing spit time settings control within 10minsManual process1.Temperature: Before using, keep the material under 25± ℃ to ensure its reactivity and viscosity.2.Mixing: weigh the material at a ratio according to the above.3.Preparation: Dry all containers and mould in 60 ℃ oven for 1 hours to remove moisture.4.Process: put A and B into a container. Mixing 1-2 minutes. Degassing under 0.1 Mp negative ?pressure to avoid the bubble. then potting smoothly. Should avoid the excessive speed to involving into air bubbles.?5.Cleaning: cleaning the containers by organic solvents, such as acetone and chloroform,etc.Bagged PU operation process1.Torn aluminum foil, please check if there are obvious bulging of AB materials;bulging is failed product.2.Take our spacer bars between AB material, mixing AB material. Knead AB material 2-3 minutes to mix it evenly, tear PE bags from the incision, pour the mixed material into the container. Curing time will need about 50 minutes at room temperature 25 ℃. No viscidity on the surface.◆Package?Package ? ? ? ? ? ? ? ? ? ? ? ? ? ?Each part is 200kg/pail ? ? ? ? Transported as general chemical?◆Storage1. Bucket: Unopened material should be stored in good sealing of the barrel, to avoid moisture intrusion, affecting quality of raw materials. Opened material should be used up as soon as possible.Store in a cool, dry area, avoid direct sunlight; storage temperature: 10-30 ℃,?Shelf life: A: 12 months, B : 12 months.2. Aluminum foil bag : The shelf life of unopened bags is 2 years; this package is vacuum plastic packaging, if aluminum foil bags in storage period has bulging phenomenon, regarded as defective product, it can not be used; please use up within 3 hours after opened foil bags.?◆Safety Operation MaterialMSDS isn't included here. Please read TDS, MSDS and label carefully before operation.You can get MSDS from Sepuna or other distributors, or mail to service center, or call +86-400-882-1323.◆Product WarrantyAll product properties and application details based on information believe to be reliable and accurate. But you still need to test its property and safety before application. The advices we supply don't apply in any circumstances. Sepuna don't make assurance of any other applications outside the specification until Sepuna supply a special written guarantee. Sepuna is only responsible to replac or refund if this product is defective within the warranty period stated above. Sepuna makes it clear that will not be liable of any accidents.?

  • CAS:
  • FOB Price:
  • /
  • Min. Order:
  • Supply Ability:
  • /
  • Port:
  • Payment Terms:
  • Aliase:
  • Purity:
  • Usage:
  • Appearance:
  • Brand:
  • Updatetime
  • 25 Oct 2016 15:05

(c)2015-2016 All Rights Reserved