Bookmark this page | Homepage | Casual look | Mobile version | 如有业务需要请点击QQ咨询如有业务需要请点击QQ咨询Skype ConsultingSkype Consulting
Member

Shanghai Sepna Chemical Technology Co.,Ltd.@

人民币


Products
  • No Category

Contact
  • Contact:Mr.Qin Gao
  • Phone:86-021-66310806
Search
 

riends links
  • No link
Your current location:Home » Product supply » High Strength Epoxy Adhesive
High Strength Epoxy Adhesive
Click image to view full size image
Product: Views:2High Strength Epoxy Adhesive 
Unit price: Negotiable
MOQ:
Quantity:
Delivery date: Since the payment date Days delivery
Valid until: Long-term effective
Last updated: 2016-12-05 14:41
  Inquiry
Details

If you are planning to wholesale best cheap and high quality high strength epoxy adhesive China, or hot sale high strength epoxy adhesive in China from professional high strength epoxy adhesive manufacturers and suppliers and factory, please feel free to contact SEPNA, and welcome to check products price with us.High Strength Epoxy adhesive SE2225◆Detailed Product DescriptionSE2225 is two component adhesive, it can cure in room temperature or by heating. After mixing part A and part B by 1:1, the adhesive cures in short time and be protection.Features1.Resistance of moisture, pollution and other atmospheric constituent?2.High tensile, excellent adhesive property, cracking resistance and ductibility3.Good anti-pollution, the require of surface pretreatment is low4.Solvent free, no by-product in curing5.Good temperature resistance, -50℃~150℃6.Good bonding with glass fabric and steel metalUseUse for bonding metal, SMC FRP, aluminum honeycomb pane and electrical machine shank and Nomex paper. It’s proper for VPI craft, glass fiber bonding, automobile parts assembling etc.◆Data TableProperties before curingPartABComponentBeige viscous bodyBeige viscous bodyViscosity, mPa.s(25℃)75,00056,000Density, ?g/cm3(25℃)1.351.35Mixture/mass ratio, weightA:B = 100:100Mixture/mass ratio, volumeA:B = 100:100Viscosity after mixing,mPa.s (25℃)65,000Density after mixing, ?g/cm3,25℃1.35Operation time after mixing, min(25℃)10Preliminary curing time(min)25℃ 25 mins or 65℃ 6 minsProperties after curingHardness, Shore D80Shear strength, ?Mpa,Al/Al17Heat conductivity, W/mK0.35Expansion parameterμm/(m,℃)60Water absorption 24h,25℃,%<0.3Dielectric strength, KV/mm>15Loss factor(1 MHz)0.014Dielectric constant (1 MHz)3.53Volume resistance DC500V, Ω·cm1.2×1015Note:①All data above were tested under standardized condition.②All data listed in the chart were for the generalized item in the series; please refer to the related data sheet for special items.③Storage condition has a direct impact to the products’ shelf life, Please refer to the instruction for special items’storing◆Operation1.Mix Part A and Part B by 1:1 evenly, seal the parts after using.2.Stirring by one direction for avoiding the bubbles; the frame and bottom also need to be stirred evenly, or it will cause not cure situation.3.Low temperature will slow the curing speed, if the primary strength can’t get, the application environment needs to do constant temperature control.4.Taking care of the material mouth seal in using◆Package and StoragePackage ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ??2*310ml Tube, 2*10kg/bottle ? ? ? ? ? ? ?Or 2*20kg/drumStorageSeal and Avoid light and lightTemperature≤25℃, humidity≤50%RHShelf life: 6 months◆Safety Operation MaterialMSDS isn't included here. Please read TDS, MSDS and label carefully before operation.You can get MSDS from Sepuna or other distributors, or mail to service center sepuna@sepuna.cn, or call +86-400-882-1323.◆Product WarrantyAll product properties and application details based on information believe to be reliable and accurate. But you still need to test its property and safety before application. The advices we supply don't apply in any circumstances. Sepuna don't make assurance of any other applications outside the specification until Sepuna supply a special written guarantee. Sepuna is only responsible to replac or refund if this product is defective within the warranty period stated above. Sepuna makes it clear that will not be liable of any accidents.


  • CAS:
  • FOB Price:
  • /
  • Min. Order:
  • Supply Ability:
  • /
  • Port:
  • Payment Terms:
  • Aliase:
  • Purity:
  • Usage:
  • Appearance:
  • Brand:
  • Updatetime
  • 25 Oct 2016 15:05
Inquiry

(c)2015-2016 openbookalliance.org All Rights Reserved